Pengenalan Dasar Ilmu Logam dan Perlakuan Panas

Buku Pengenalan Dasar Ilmu Logam dan Perlakuan Panas hadir sebagai rujukan fundamental bagi mahasiswa teknik, akademisi, dan praktisi industri yang ingin memahami prinsip-prinsip dasar ilmu metalurgi dan transformasi termal pada material logam. Disusun dengan pendekatan ilmiah yang terstruktur, buku ini memadukan teori dasar dengan penerapan praktis di dunia industri, sehingga menjembatani antara pengetahuan akademik dan kebutuhan teknis di lapangan.

Di dalamnya dibahas secara komprehensif karakteristik fisik dan kimia logam, struktur kristal, teori difusi, diagram fasa, serta pengaruh unsur paduan terhadap sifat mekanik dan termal material. Buku ini juga menguraikan secara mendalam berbagai proses perlakuan panas seperti annealing, normalizing, quenching, dan tempering—termasuk mekanisme mikrostruktural yang terjadi selama setiap tahap proses tersebut.

Dengan dukungan ilustrasi, contoh kasus, dan penjelasan yang sistematis, buku ini tidak hanya memperkenalkan konsep-konsep dasar, tetapi juga memberikan wawasan kritis mengenai bagaimana perlakuan panas dapat mengubah sifat logam untuk memenuhi tuntutan spesifik dalam bidang manufaktur, otomotif, konstruksi, dan rekayasa material lanjutan.

Sebagai buku ajar, referensi laboratorium, maupun pegangan teknis, karya ini dirancang untuk membekali pembaca dengan landasan kuat dalam memahami hubungan antara struktur mikro, proses termal, dan performa material logam. Suatu bacaan yang penting bagi siapa saja yang ingin menapaki dunia ilmu material dengan pemahaman yang kokoh dan aplikatif.

Order now

Order via Whatsapp

References

Abbott, R.R. (1912) ‘Steel and its Heat Treatment’, Scientific American, 73(1899supp).

Available at: https://doi.org/10.1038/scientificamerican05251912-323asupp.

Ackermann, M. et al. (2022) ‘Automated segmentation of martensite-austenite islands in bainitic steel’, Materials Characterization, 191. Available at: https://doi.org/10.1016/j.matchar.2022.112091.

Ahmed, A. et al. (2021) ‘4D printing: Fundamentals, materials, applications and challenges’, Polymer. Available at: https://doi.org/10.1016/j.polymer.2021.123926.

Ali Nurdin et al. (2023) ‘PEMBUATAN DAN KARAKTERISASI KATALIS ZEOLIT ZSM-5 UNTUK  KONVERSI  BIOETANOL  MENJADI  BIOETILENA’,  Majalah  Ilmiah Pengkajian Industri, 12(2). Available at: https://doi.org/10.29122/mipi.v12i2.2741.

Aminorroaya, S., Reid, M. and Dippenaar, R. (2011) ‘Simulation of microsegregation and the solid/liquid interface progression in the concentric solidification technique’, Modelling and Simulation in Materials Science and Engineering, 19(2). Available at: https://doi.org/10.1088/0965-0393/19/2/025003.

Andersen, P.J. (2020) ‘Stainless Steels’, in Biomaterials Science: An Introduction to Materials in Medicine. Available at: https://doi.org/10.1016/B978-0-12-816137-1.00019-2.

Arabi Jeshvaghani, R. et al. (2014) ‘Microstructural study and wear behavior of ductile iron surface alloyed by Inconel 617’, Materials and Design, 54. Available at: https://doi.org/10.1016/j.matdes.2013.08.059.

‘Arc Welding Handbook’ (1925) Nature, 115(2890). Available at: https://doi.org/10.1038/115416d0.

ASTM (2013) ‘ASTM E112-13: Standard test methods for determining average grain size’,

ASTM International [Preprint].

Avanzini, A. (2023) ‘Fatigue Behavior of Additively Manufactured Stainless Steel 316L’, Materials. Available at: https://doi.org/10.3390/ma16010065.

Azevedo, J.M.C., CabreraSerrenho, A. and Allwood, J.M. (2018) ‘Energy and material efficiency of steel powder metallurgy’, Powder Technology, 328. Available at: https://doi.org/10.1016/j.powtec.2018.01.009. challenges and opportunities’, Journal of Constructional Steel Research, 64(11). Available at: https://doi.org/10.1016/j.jcsr.2008.07.011.

Bajaj, P. et al. (2020) ‘Steels in additive manufacturing: A review of their microstructure and properties’, Materials Science and Engineering: A, 772. Available at: https://doi.org/10.1016/j.msea.2019.138633.

Bertsimas, D. and Tsitsiklis, J. (1993) ‘Simulated annealing’, Statistical Science, 8(1). Available at: https://doi.org/10.1214/ss/1177011077.

Bi, G. et al. (2020) ‘Acceptability analysis for determining the average grain size by ASTM E112 standard’, in IOP Conference Series: Materials Science and Engineering. Available at: https://doi.org/10.1088/1757-899X/770/1/012023.

Binnemans, K. and Jones, P.T. (2017) ‘Solvometallurgy: An Emerging Branch of Extractive Metallurgy’, Journal of Sustainable Metallurgy. Available at: https://doi.org/10.1007/s40831-017-0128-2.

Boehlert, C., Niinomi, M. and Ikeda, M. (2005) ‘Materials Science and Engineering C: Introduction’, in Materials Science and Engineering C. Available at: https://doi.org/10.1016/j.msec.2004.12.008.

Brien, A.O. (2013) ‘Maritime Welding Handbook’, Wilhelmsen Ships Service’s [Preprint]. Callister Jr, W.D. (2000) ‘Materials Science and Engineering - An Introduction (5th ed.)’, Anti-Corrosion Methods and Materials, 47(1). Available at: https://doi.org/10.1108/acmm.2000.12847aae.001.

Callister Jr, W.D. and Rethwisch, D.G. (2003) Materials Science and Engineering: An Introduction, 1st Australian and New Zealand Edition, Materials Science and Engineering - An Introduction.

Callister, W.D. (1991) ‘Materials science and engineering: An introduction (2nd edition)’, Materials & Design, 12(1). Available at: https://doi.org/10.1016/0261-3069(91)90101-9.

Callister, William D. (2007) ‘Material Science and Engineering, 7th ed’, John Wiley & Sons, 344(11).

Callister, William D (2007) Materials Science and Engineering An Introduction with special contributions by, New England Journal of Medicine.

Callister, W.D. (2010) Wiley: Materials Science and Engineering: An Introduction, 8th Edition - William D. Callister, David G. Rethwisch, Wiley. Engineering: An Integrated Approach’, Wiley [Preprint].

Carter, C.B. and Norton, M.G. (2013) Ceramic materials: Science and engineering, Ceramic Materials: Science and Engineering. Available at: https://doi.org/10.1007/978-1-4614- 3523-5.

Chandra-Ambhorn, S. et al. (2020) ‘High temperature oxidation of stainless steels’, Solid State Phenomena, 300. Available at: https://doi.org/10.4028/www.scientific.net/SSP.300.81.

Chen, S. et al. (2017) ‘Current state of Fe-Mn-Al-C low density steels’, Progress in Materials Science. Available at: https://doi.org/10.1016/j.pmatsci.2017.05.002.

Clayton, C.R. (1987) ‘Materials science and engineering: An introduction’, Materials Science and Engineering, 94. Available at: https://doi.org/10.1016/0025-5416(87)90343-0.

Clayton, C.R. and Lu, Y.C. (1986) ‘A Bipolar Model of the Passivity of Stainless Steel: The Role of Mo Addition’, Journal of The Electrochemical Society, 133(12). Available at: https://doi.org/10.1149/1.2108451.

Corbett, G.G. (1994) ‘Book Review: Materials Science and Engineering, an Introduction’, International Journal of Mechanical Engineering Education, 22(1). Available at: https://doi.org/10.1177/030641909402200102.

Cree, J. and Hoover, A. (2023) ‘Correction: Statistical Comparisons & Correlations of Thermal Analysis, Ultrasonic Velocity and Image Analysis Metallography Methods for Quantification of Ductile Iron Microstructure’, International Journal of Metalcasting [Preprint]. Available at: https://doi.org/10.1007/s40962-023-01158-8.

Čurlej, J. et al. (2022) ‘The Effect of Heat Treatment on Cow’s Milk Protein Profiles’, Foods, 11(7). Available at: https://doi.org/10.3390/foods11071023.

Darmadi, W. (2015) ‘Pengaruh Media Pendingin Terhadap Struktur Mikro Dan Kekerasan Pada Besi Cor’, Teknik Mesin Universitas Muhammadiyah Surakarta [Preprint].

Edmonds, D. V. et al. (2006) ‘Quenching and partitioning martensite-A novel steel heat treatment’, Materials Science and Engineering: A, 438–440(SPEC. ISS.). Available at: https://doi.org/10.1016/j.msea.2006.02.133.

Emelyanenko, K.A., Emelyanenko, A.M. and Boinovich, L.B. (2023) ‘Laser Obtained Superhydrophobic State for Stainless Steel Corrosion Protection, a Review’, Coatings. Available at: https://doi.org/10.3390/coatings13010194.

Extremera, J. et al. (2022) ‘Reality-Virtuality Technologies in the Field of Materials Science https://doi.org/10.3390/app12104968.

Fang, Q. et al. (2017) ‘Experimental and modelling study of the denaturation of milk protein by heat treatment’, Korean Journal for Food Science of Animal Resources, 37(1). Available at: https://doi.org/10.5851/kosfa.2017.37.1.44.

Fang, Z.Z. et al. (2018) ‘Powder metallurgy of titanium–past, present, and future’, International Materials Reviews. Available at: https://doi.org/10.1080/09506608.2017.1366003.

Feng, T. et al. (2021) ‘Reduced vegetative growth increases grain yield in spring wheat genotypes in the dryland farming region of north-west China’, Agronomy, 11(4). Available at: https://doi.org/10.3390/agronomy11040663.

Francis, R. and Byrne, G. (2021) ‘Duplex stainless steels—alloys for the 21st century’, Metals. Available at: https://doi.org/10.3390/met11050836.

Froes, F.H.S. (1990) ‘Powder metallurgy’, Advanced Materials and Processes, 137(1). Available at: https://doi.org/10.1243/pime_proc_1946_154_027_02.

FSW-TECH ERASMUS (2017) ‘Friction Stir Welding Handbook’, Erasmus+ [Preprint]. Gardner, L. (2019) ‘Stability and design of stainless steel structures – Review and outlook’, Thin-Walled Structures. Available at: https://doi.org/10.1016/j.tws.2019.04.019.

Gasson, P.C. (2011) ‘Materials Sciences and Engineering – Eighth edition. W. D. Callister and G. Rethwisch John Wiley and Sons, The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ, UK. 2010. 968pp. Illustrated. £47.99. ISBN 978-0-470-50586-1.’, The Aeronautical Journal, 215(1168). Available at: https://doi.org/10.1017/s0001924000005947.

Glassman, J.D. et al. (2020) ‘Mechanical properties of weathering steels at elevated temperatures’, Journal of Constructional Steel Research, 168. Available at: https://doi.org/10.1016/j.jcsr.2020.105996.

Haliq, R. (2021) ‘ANALISIS ALUMNI PENERIMA BEASISWA KALTIM CEMERLANG TERHADAP PEKERJAAN LULUSAN MELALUI HASIL E-TRACER STUDY 2019 INSTITUT TEKNOLOGI KALIMANTAN’, JSHP : Jurnal Sosial Humaniora dan Pendidikan, 5(1). Available at: https://doi.org/10.32487/jshp.v5i1.973.

Haliq, R. et al. (2023) ‘Syntheses and Applications of Nanomaterials-Based Photocatalysts for Air Purification’, in Green Energy and Technology. Available at: https://doi.org/10.1007/978-981-19-6748-1_2.

Hydroxide (NaOH) as Electrolyte for Applications Bio-Battery’, Defect and Diffusion Forum, 421. Available at: https://doi.org/10.4028/p-9b45r6.

Haliq, R. and Raharjo, H.T. (2019) ‘Analisis Pengaruh Variasi Arus dan Sudut Kampuh dengan Metode Pengelasan GTAW terhadap Sifat Mekanik dan Struktur Mikro Baja ST 41’, SPECTA                     Journal  of                          Technology, 2(2).                       Available        at: https://doi.org/10.35718/specta.v2i2.104.

Haliq, R., Rayudi, A.F. and Suprayitno, A. (2019) ‘The Effect of Filler Composition and Shape to Sound Capability Insulation and Modulus Elasticity Natural Fiber Galam Wood (Melaleuca Leucadendra) - Polyester’, in IOP Conference Series: Materials Science and Engineering. Available at: https://doi.org/10.1088/1757-899X/494/1/012037.

Herrera, C., Ponge, D. and Raabe, D. (2011) ‘Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability’, Acta Materialia, 59(11). Available at: https://doi.org/10.1016/j.actamat.2011.04.011.

Hodder, K.J. and Chalaturnyk, R.J. (2019) ‘Bridging additive manufacturing and sand casting: Utilizing foundry sand’, Additive Manufacturing, 28. Available at: https://doi.org/10.1016/j.addma.2019.06.008.

Hou, X.M., Yang, Y.J. and Qian, J. (2021) ‘Phase transformation behaviors and mechanical properties of NiTi endodontic files aftegold heat treatment and blue heat treatment’, Journal of Oral Science, 63(1). Available at: https://doi.org/10.2334/josnusd.19-0331.

Hsiao, Y.S. et al. (2023) ‘Microfluidic device using metallic nanostructure arrays for the isolation, detection, and purification of exosomes’, Journal of Alloys and Compounds, 947. Available at: https://doi.org/10.1016/j.jallcom.2023.169658.

Ilschner, B. (2003) ‘Teaching materials science and engineering’, Sadhana - Academy Proceedings in Engineering Sciences, 28(3–4). Available at: https://doi.org/10.1007/BF02706463.

Jin, J.C. et al. (2023) ‘Microstructures and intergranular corrosion resistances of hot-rolled austenitic stainless steel clad plates’, Journal of Materials Research and Technology, 26. Available at: https://doi.org/10.1016/j.jmrt.2023.07.192.

Khan, N.Z. et al. (2024) ‘Steel heat treatment: Equipment and process design’, in Comprehensive Materials Processing. Available at: https://doi.org/10.1016/b978-0-323- 96020-5.00249-1. RSC Advances, 10(48). Available at: https://doi.org/10.1039/d0ra02996c.

Kirkpatrick, S., Gelatt, C.D. and Vecchi, M.P. (1983) ‘Optimization by simulated annealing’, Science, 220(4598). Available at: https://doi.org/10.1126/science.220.4598.671.

Kong, D. et al. (2019) ‘Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes’, Journal of Materials Science and Technology, 35(7). Available at: https://doi.org/10.1016/j.jmst.2019.03.003.

Krauss, G. (1990) Steels: Heat Treatment and Processing Principles, ASM International.

Kronenberg, P. et al. (2022) ‘Quantification of methods used in field metallography using the example of quality assurance measures for a circular economy for high-alloy steels’, Praktische Metallographie/Practical Metallography, 59(6). Available at: https://doi.org/10.1515/pm-2022-0034.

Kucukler, M. (2023) ‘Shear resistance and design of stainless steel plate girders in fire’, Engineering Structures, 276. Available at: https://doi.org/10.1016/j.engstruct.2022.115331. Kvasnička, V. and Pospíchal, J. (1996) ‘Simulated annealing’, Match, 34. Available at: https://doi.org/10.3156/jfuzzy.9.6_870.

Laksono, A.D. et al. (2022) ‘Analisis Hasil Pelatihan Manajemen UMKM Kelurahan Prapatan dengan Uji Statistik Chi Square’, Jurnal Pengabdian Masyarakat Progresif Humanis Brainstorming, 5(1). Available at: https://doi.org/10.30591/japhb.v5i1.2700.

Laleh, M. et al. (2023) ‘Heat treatment for metal additive manufacturing’, Progress in Materials Science. Available at: https://doi.org/10.1016/j.pmatsci.2022.101051.

Le, V.T. et al. (2021) ‘Wire and arc additive manufacturing of 308L stainless steel components: Optimization of processing parameters and material properties’, Engineering Science and Technology, an International Journal, 24(4). Available at: https://doi.org/10.1016/j.jestch.2021.01.009.

Lebea, L. and Pita, M. (2022) ‘The Effect of Cooling Media on the Corrosion Behavior of Mild Steel after Heat Treatment’, International Journal of Emerging Technology and Advanced Engineering, 12(9). Available at: https://doi.org/10.46338/ijetae0922_16.

Lei, W. et al. (2021) ‘Facile synthesis of Fe3C nano-particles/porous biochar cathode materials for lithium sulfur battery’, Journal of Alloys and Compounds, 853. Available at: https://doi.org/10.1016/j.jallcom.2020.157024.

Li, S. et al. (2021) ‘High-Speed Machining of Malleable Cast Iron by Various Cutting Tools (English Edition), 34(1). Available at: https://doi.org/10.1186/s10033-021-00561-8.

Lo, K.H., Shek, C.H. and Lai, J.K.L. (2009) ‘Recent developments in stainless steels’, Materials Science and Engineering R: Reports. Available at: https://doi.org/10.1016/j.mser.2009.03.001.

Lollini, F. et al. (2019) ‘Corrosion behaviour of stainless steel reinforcement in concrete’, Corrosion Reviews. Available at: https://doi.org/10.1515/corrrev-2017-0088.

Łyczkowska-Widłak, E., Lochyński, P. and Nawrat, G. (2020) ‘Electrochemical polishing of austenitic stainless steels’, Materials. Available at: https://doi.org/10.3390/ma13112557.

MacHado, I.F. (2006) ‘Technological advances in steels heat treatment’, Journal of Materials Processing   Technology,                  172(2). Available at: https://doi.org/10.1016/j.jmatprotec.2005.09.007.

Malik, H. (1970) ‘Book Review: Materials Science aAnd Engineering: An Introduction by William D. Callister’, IIUM Engineering Journal, 3(1). Available at: https://doi.org/10.31436/iiumej.v3i1.353.

Mostafa, A. and Medraj, M. (2017) ‘Binary phase diagrams and thermodynamic properties of silicon and essential doping elements (Al, As, B, Bi, Ga, In, N, P, Sb and Tl)’, Materials. Available at: https://doi.org/10.3390/ma10060676.

Muthupandi, V. et al. (2003) ‘Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel welds’, Materials Science and Engineering: A, 358(1–2). Available at: https://doi.org/10.1016/S0921-5093(03)00077-7.

Nilsson, J.O. (1992) ‘Super duplex stainless steels’, Materials Science and Technology (United Kingdom), 8(8). Available at: https://doi.org/10.1179/mst.1992.8.8.685.

Novák, P. (2020) ‘Advanced powder metallurgy technologies’, Materials. Available at: https://doi.org/10.3390/ma13071742.

O’Halloran, S. et al. (2023) ‘Two-Photon Polymerization: Fundamentals, Materials, and Chemical Modification Strategies’, Advanced Science. Available at: https://doi.org/10.1002/advs.202204072.

Pereira, R. et al. (2024) ‘Parametric study of local laser heat treatment technology on multi forming of advanced-high strength steel (AHSS) part with complex shape’, International Journal of Lightweight Materials and Manufacture, 7(2). Available at: https://doi.org/10.1016/j.ijlmm.2023.10.002. Scientific Reports, 10(1). Available at: https://doi.org/10.1038/s41598-020-63012-9.

Prasetyo, P. (2018) ‘Analisis Struktur Kristal, Morfologi, Dan Sifat Magnetik Polikristal’, Skripsi, fisika UIN, 7.

Putra, W.N. et al. (2024) ‘Effect of Multi-walled Carbon Nanotube and Polyethylene Glycol Addition in Nanofluid Quench Medium for Steel Heat Treatment Application’, International Journal of Technology, 15(2). Available at: https://doi.org/10.14716/ijtech.v15i2.6690.

Qi, J., Cheung, A.M. and Poon, S.J. (2019) ‘High Entropy Alloys Mined From Binary Phase Diagrams’, Scientific Reports, 9(1). Available at: https://doi.org/10.1038/s41598-019- 50015-4.

Qin, J. et al. (2024) ‘Towards operation-stabilizing perovskite solar cells: Fundamental materials, device designs, and commercial applications’, InfoMat. Available at: https://doi.org/10.1002/inf2.12522.

Risanti, D.D. (2021) ‘ANALISIS MATEMATIS PENGELASAN GREY CAST IRON MENGGUNAKAN PROSES GTAW DENGAN DAN TANPA PREHEAT’, Jurnal Technopreneur (JTech), 9(1). Available at: https://doi.org/10.30869/jtech.v9i1.698.

SALSABIILA VELINA (2011) Mechanical Engineering 2011, BLOG MAHASISWA UNIVERSITAS BRAWIJAYA-SALSABIILA VELINA.

Sames, W.J. et al. (2016) ‘The metallurgy and processing science of metal additive manufacturing’, International Materials Reviews. Available at: https://doi.org/10.1080/09506608.2015.1116649.

Sandhya, N. et al. (2019) ‘Prediction of mechanical properties of steel using data science techniques’, International Journal of Recent Technology and Engineering, 8(3). Available at: https://doi.org/10.35940/ijrte.C3952.098319.

Saxena, P. et al. (2021) ‘Sustainability metrics for rapid manufacturing of the sand casting moulds: A multi-criteria decision-making algorithm-based approach’, Journal of Cleaner Production, 311. Available at: https://doi.org/10.1016/j.jclepro.2021.127506.

Shbanah, M. et al. (2023) ‘The Effect of Heat Treatment on a 3D-Printed PLA Polymer’s Mechanical Properties’, Polymers, 15(6). Available at: https://doi.org/10.3390/polym15061587.

Singh, R. (2022) Arc Welding Processes Handbook, Arc Welding Processes Handbook.

Smith, W.F. and Javad Hashemi, P. (2006) Fundamentos de la ciencia e ingeniería de materiales, Foundamentals of Materials Science and Engineering.

Soleimani, M., Mirzadeh, H. and Dehghanian, C. (2019) ‘Effect of grain size on the corrosion resistance of low carbon steel’, Materials Research Express, 7(1). Available at: https://doi.org/10.1088/2053-1591/ab62fa.

Specification, S. (2009) ‘Standard Specification for Cupola Malleable Iron 1’, Test, 87(February 1999).

Tahchieva, A.B., Llorca-Isern, N. and Cabrera, J.M. (2019) ‘Duplex and superduplex stainless steels: Microstructure and property evolution by surface modification processes’, Metals, 9(3). Available at: https://doi.org/10.3390/met9030347.

Taxell, P. and Huuskonen, P. (2022) ‘Toxicity assessment and health hazard classification of stainless steels’, Regulatory Toxicology and Pharmacology. Available at: https://doi.org/10.1016/j.yrtph.2022.105227.

Thirumalai Kumaran, S. et al. (2021) ‘Corrosion studies on stainless steel 316 and their prevention – A review’, INCAS Bulletin. Available at: https://doi.org/10.13111/2066- 8201.2021.13.3.21.

Tillmann, W. et al. (2022) ‘An investigation of the influence of integration of steel heat treatment and brazing process on the microstructure and performance of vacuum-brazed cemented carbide/steel joints’, Welding in the World, 66(5). Available at: https://doi.org/10.1007/s40194-022-01266-9.

Totten, G.E. (2006a) Steel heat treatment: Metallurgy and technologies, Steel Heat Treatment: Metallurgy and Technologies.

Totten, G.E. (2006b) ‘Steel heat treatment handbook 2nd edition’, Steel Heat Treatment: Metallurgy and Technologies [Preprint].

Turnali, A. et al. (2023) ‘Evolution of microstructural heterogeneities in additively manufactured low-alloy steel’, Additive Manufacturing, 78. Available at: https://doi.org/10.1016/j.addma.2023.103859.

Verdeja González, J.I., Fernández-González, D. and Verdeja González, L.F. (2023) ‘Heat Treatment of Steels’, in Topics in Mining, Metallurgy and Materials Engineering. Available at: https://doi.org/10.1007/978-3-031-05702-1_2.

Wan, F. et al. (2024) ‘Research of the Impact of Hydrogen Metallurgy Technology on the (Switzerland) , 16(5). Available at: https://doi.org/10.3390/su16051814.

Wang, L. and Speer, J.G. (2013) ‘Quenching and Partitioning Steel Heat Treatment’, Metallography, Microstructure, and Analysis, 2(4). Available at: https://doi.org/10.1007/s13632-013-0082-8.

Wang, Y. et al. (2020) ‘Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology’, Energy and AI. Available at: https://doi.org/10.1016/j.egyai.2020.100014.

Warzel, R. (2016) ‘High performance stainless steel mixes’, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 63(7). Available at: https://doi.org/10.2497/jjspm.63.591.

Wei, S. et al. (2022) ‘Effect of heat treatment on the microstructure and mechanical properties of 2.4 GPa grade maraging steel fabricated by laser powder bed fusion’, Additive Manufacturing, 59. Available at: https://doi.org/10.1016/j.addma.2022.103190.

Welding Handbook (1969) Welding Handbook. Available at: https://doi.org/10.1007/978-1-349- 00324-2.

Welding Handbook (1987) Welding Handbook. Available at: https://doi.org/10.1007/978-1-349- 10624-0.

Wright, C. and Bridge, J. (2024) ‘Case Study: Practical Introduction of a Materials Selection Software in a Fundamentals of Materials Science Course’, in. Available at: https://doi.org/10.18260/1-2--29603.

Xing, M. et al. (2020) ‘Temperature-dependent surface free energy and the Wulff shape of iron and iron carbide nanoparticles: A molecular dynamics study’, Applied Surface Science, 509. Available at: https://doi.org/10.1016/j.apsusc.2019.144859.

Xiong, J., Zhang, T.Y. and Shi, S.Q. (2020) ‘Machine learning of mechanical properties of steels’, Science China Technological Sciences, 63(7). Available at: https://doi.org/10.1007/s11431-020-1599-5.

Yamashita, H. et al. (2014) ‘Coformer screening using thermal analysis based on binary phase diagrams’, Pharmaceutical Research, 31(8). Available at: https://doi.org/10.1007/s11095- 014-1296-4.

Yin, Q. et al. (2023) ‘A DFT study towards dynamic structures of iron and iron carbide and their effects on the activity of the Fischer-Tropsch process’, RSC Advances, 13(48).

Yulianti, L.P. and Surendro, K. (2022) ‘Implementation of Quantum Annealing: A Systematic Review’, IEEE Access. Available at: https://doi.org/10.1109/ACCESS.2022.3188117.

Zai, L. et al. (2020) ‘Laser powder bed fusion of precipitation-hardened martensitic stainless steels: A review’, Metals. Available at: https://doi.org/10.3390/met10020255.

Zhang, C. et al. (2021) ‘The effect of vibration mixing on the mechanical properties of steel fiber concrete with different mix ratios’, Materials, 14(13). Available at: https://doi.org/10.3390/ma14133669.

Zhang, H. et al. (2010) ‘Growing-season rainfall, ear number and the water-limited potential yield of wheat in south-western Australia’, Crop and Pasture Science, 61(4). Available at: https://doi.org/10.1071/CP09288.

Zhang, Z.L. and Bell, T. (1985) ‘Structure and corrosion resistance of plasma nitrided stainless steel’, Surface Engineering, 1(2). Available at: https://doi.org/10.1179/sur.1985.1.2.131.

Zhou, X. et al. (2024) ‘Optimization of Casting Process of Malleable Iron Connector’, Zhuzao/Foundry, 73(1).

Zitelli, C., Folgarait, P. and Di Schino, A. (2019) ‘Laser powder bed fusion of stainless steel grades: A review’, Metals. Available at: https://doi.org/10.3390/met9070731.