CONTROL SYSTEM

This book is specifically intended for undergraduate and graduate students to study control theory. This TextBook of Traditional Control System was compiled based on the author's teaching experience in the Control Systems course in the  Electrical Engineering Study Program. the material in this book consists of A Brief History of the Development of Control Engineering, Mathematical Model of Physical Systems, Laplace Transformation, TRANSFER FUNCTION MODEL, SYSTEM BOX CHART,  SYSTEM IDENTIFICATION, SYSTEM RESPONSE, SYSTEM STABILITY ANALYSIS, COMPENSATOR DESIGN, and CONTROL DESIGN.

 

Order now

Order via Whatsapp

 

Author Biography

Assist.Prof. Dr. Ir. Iswanto, S.T., M.Eng., IPM., Asean Eng., was born in Sleman, Yogyakarta, Indonesia, in 1981. He received his B.S, M.Eng and Dr degrees from Gadjah Mada University, Yogyakarta, Indonesia in 2007, 2009, and 2018. He became a Lecturer and Researcher in the Electrical Engineering Department at Yogyakarta Muhammadiyah University in 2010. His research is currently focused on Control, Robots, and Instrumentation. Scopus ID 56596730700. He is the editor in chief of the robotic and control journal (https://journal.umy.ac.id/index.php/jrc) which has been indexed by Scopus since 2021.

 

References

 [1] L. Yang et al., “A fast robust PWM method for photovoltaic grid-connected inverter,” in IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, 2017, pp. 4811–4816.

[2] M. Yu, Y. Wang, and Y. Li, “A novel sorting-based multi-objective model predictive control for PMSG wind turbines,” in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, 2015, pp. 000267–000272.

[3] A. Jiyao, Q. Chen, M. Chen, and Z. Li, “A Novel Stability Criterion for a Class of Networked Control Systems Using Some Integral Inequalities,” in 2018 IEEE 27th International Symposium on Industrial Electronics (ISIE), 2018, pp. 579–584.

[4] H. Li, Y. Zou, X. Jiang, and C. Liu, “A stability improvement method for LLC resonant converter with additional resonant current peak proportion control,” in IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society, 2020, pp. 4655–4660.

[5] M. S. Mahmoud and B. J. Karaki, “Delay Dependent Robust Stability of Reset Systems,” in IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, 2018, pp. 2251–2255.

[6] A. Yabuki, T. Yoshioka, K. Ohishi, T. Miyazaki, and Y. Yokokura, “Design method of stable force control system using new resonance ratio control and instantaneous state observer,” in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, 2015, pp. 005310–005315.

[7] Z. Guan, I. Mizumoto, and T. Yamamoto, “Design of PCA-based Data-Driven Adaptive Output Feedback Control for Nonlinear Systems,” in 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), 2019, pp. 497–502.

[8] J. Ma, D. Zhang, W. Yuan, K. Liu, W. Xu, and P. Yan, “Electromagnetic gun loading control system based on cloud model,” in 2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA), 2016, pp. 957–962.

[9] X. Xi, H. Geng, G. Yang, Y. Zhou, J. Lin, and Y. Song, “Small-signal stability analysis and PHIL experiment validation of power system with WECS voltage/frequency ancillary control,” in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, 2015, pp. 002544–002549.

[10] G. Ma, L. Qin, X. Liu, and G. Wu, “Event-triggered output-feedback control for switched linear systems with applications to a boost converter,” in 2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA), 2016, pp. 2431–2436.

[11] S. Debnath and J. Sun, “Fidelity Requirements with Fast Transients from VSC-HVdc,” in IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, 2018, pp. 6007–6014.

[12] M. Park, H. C. Koag, and H.-S. Ahn, “Functional Safety Improvement of Electric Power Steering System by Using Electronic Stability Control System,” in 2018 IEEE 27th International Symposium on Industrial Electronics (ISIE), 2018, pp. 230–234.

[13] X. Xu, M. Zhu, C. Hou, and X. Cai, “Impedance Readjusting Method of Grid-Connected Inverter Cluster with PR Control Strategy,” in 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA), 2019, pp. 1342–1347.

[14] J. Zhang, C. Peng, S. Ma, and J. Jiang, “Improved delay-dependent stability criteria for networked control systems via discrete Wirtinger-based inequality,” in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, 2015, pp. 000416–000420.

[15] U. Tamrakar, T. M. Hansen, R. Tonkoski, and D. A. Copp, “Model Predictive Frequency Control of Low Inertia Microgrids,” in 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), 2019, pp. 2111–2116.

[16] B. Liu, Y. Liu, W. Li, Y. Ma, and Z. Jiang, “Modeling and control of networked control systems with random network-induced delay and packet-dropout,” in 2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA), 2017, pp. 786–791.

[17] A. K. Behera and B. Bandyopadhyay, “Event based robust stabilization of linear systems,” in IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, 2014, pp. 133–138.

[18] J. Xia, Y. Guo, and X. Zhang, “Online grid inductance estimation for electric traction PWM rectifier based on dual-frequency harmonic current injection,” in IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, 2017, pp. 1347–1352.

[19] B. Han, Y. Chen, S. Zheng, M. Li, and Y. Shi, “Robust Control for a Magnetically Suspended Control Moment Gyro with Strong Gyroscopic Effects,” in IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, 2018, pp. 2440–2446.

[20] Y. Liu and H. Zhang, “Robust Driver-Automation Shared Control For A Lane Keeping System Using Interval Type 2 Fuzzy Method,” in 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), 2019, pp. 1944–1949.

[21] F. Long, C.-K. Zhang, Y. He, and M. Wu, “Stability analysis of load frequency control systems with two delays in each area,” in IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, 2017, pp. 5656–5660.

[22] Z. C. Feng and M. Xin, “The effect of continuum model on the stability of feedback control of thermal systems,” in 2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA), 2016, pp. 245–250.

[23] Q. Zhang et al., “The Study for the LCL Grid-connected Inverter Stability Problem Caused by Digital Delay,” in 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA), 2019, pp. 2287–2292.

[24] S. Hwang, C. H. Han, J. Lee, M. Yoon, S. Jung, and G. Jang, “VSC HVDC Capacitance Estimation for Inertia Emulation Control in Jeju Island Power System,” in 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), 2019, pp. 189–194.

[25] S. Biricik, T. Ngo, H. Komurcugil, and M. Basu, “Nonlinear control methods for single-ended primary-inductor power converters,” in IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, 2017, pp. 1337–1340.

[26] M. Hannachi, O. Elbeji, M. Benhamed, and L. Sbita, “Maximum power point tracking of a PMSG wind turbine with On-Off control based particle swarm optimization,” in 2019 International Conference on Signal, Control and Communication (SCC), 2019, pp. 76–80.

[27] T. Urica, P. Sojka, D. Koniar, and A. S. Libor Hargas, “The Control Process of an On-off Controller,” in 2019 20th International Scientific Conference on Electric Power Engineering (EPE), 2019, pp. 1–6.

[28] B. Hahn, “Performance and Power/Energy Consumption in Microrobotic Servo Sytems : Iterative Adaptive On-Off Controllers vs LQG/PWM Controllers,” J. Inst. Control. Robot. Syst., vol. 23, no. 2, pp. 102–108, Feb. 2017.

[29] S. Kahla, Y. Soufi, M. Sedraoui, and M. Bechouat, “On-Off control based particle swarm optimization for maximum power point tracking of wind turbine equipped by DFIG connected to the grid with energy storage,” Int. J. Hydrogen Energy, vol. 40, no. 39, pp. 13749–13758, Oct. 2015.

[30] S. Andrew Putrayudha, E. C. Kang, E. Evgueniy, Y. Libing, and E. J. Lee, “A study of photovoltaic/thermal (PVT)-ground source heat pump hybrid system by using fuzzy logic control,” Appl. Therm. Eng., vol. 89, pp. 578–586, Oct. 2015.

[31] M. A. Abdullah, A. Z. Zainordin, and K. Hudha, “PERFORMANCE EVALUATION OF SHAFT SPEED CONTROL USING A MAGNETORHEOLOGICAL BRAKE,” Int. J. Automot. Mech. Eng., vol. 11, pp. 2654–2663, Jun. 2015.

[32] S. S. Butt, R. Prabel, and H. Aschemann, “Model-predictive on-off control of a combustion-heating-system for vehicles,” in 2013 European Control Conference (ECC), 2013, pp. 1988–1993.

[33] O. Lopez-Santos, H. F. Murcia, and J. M. Barrero, “Digital control of a single-phase boost rectifier with power factor correction using a dsPIC,” in 2012 IEEE 4th Colombian Workshop on Circuits and Systems (CWCAS), 2012, pp. 1–7.

[34] B. Edamana and K. Oldham, “An optimal on-off controller with switching costs using non-linear binary programming,” in 2009 American Control Conference, 2009, pp. 4227–4232.

[35] U. Schmitz, R. Haber, and R. Bars, “Evolutionary optimization methods for predictive on-off control,” IFAC Proc. Vol., vol. 42, no. 19, pp. 408–413, 2009.

[36] J. Zhao, H. Zhang, X. Zhang, S. Li, B. Qin, and F. Han, “Research on magneto-hydraulic proportional control strategy for single degree of freedom supporting system of magnetic–liquid double suspension bearing,” Rev. Sci. Instrum., vol. 93, no. 9, p. 094705, Sep. 2022.

[37] F. Ünker, “Proportional control moment gyroscope for two-wheeled self-balancing robot,” J. Vib. Control, vol. 28, no. 17–18, pp. 2310–2318, Sep. 2022.

[38] J. Walter, P. Rosmanith, D. S. De Oliveira, S. Reitelshofer, A. Del Vecchio, and J. Franke, “Proportional Control of a Soft Cable-Driven Exoskeleton via a Myoelectrical Interface Enables Force-Controlled Finger Motions,” in 2022 9th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics (BioRob), 2022, pp. 1–6.

[39] M. H. Hasbani, D. Y. Barsakcioglu, M. K. Jung, and D. Farina, “Simultaneous and proportional control of wrist and hand degrees of freedom with kinematic prediction models from high-density EMG,” in 2022 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 2022, pp. 764–767.

[40] K. Yang, T. B. Meier, H. Zhou, G. S. Fischer, and C. J. Nycz, “A sEMG Proportional Control for the Gripper of Patient Side Manipulator in da Vinci Surgical System,” in 2022 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 2022, pp. 4843–4848.

[41] C.-Y. Yang, Y.-S. Chien, and J.-H. Chou, “Simulation study of the nonideal mixing effect on the stability of continuous and discrete proportional control of a nonadiabatic CSTR based on Cholette’s model,” J. Chinese Inst. Eng., vol. 44, no. 6, pp. 519–531, Aug. 2021.

[42] M. A. Drzewiecki and J. Guzinski, “Application of the ISE Optimized Proportional Control of the Wave Maker in a Towing Tank,” IEEE Access, vol. 10, pp. 42151–42162, 2022.

[43] C. Chen, Y. Yu, X. Sheng, D. Farina, and X. Zhu, “Simultaneous and proportional control of wrist and hand movements by decoding motor unit discharges in real time,” J. Neural Eng., vol. 18, no. 5, p. 056010, Oct. 2021.

[44] V. Mendez, L. Pollina, F. Artoni, and S. Micera, “Deep Learning with Convolutional Neural Network for Proportional Control of Finger Movements from surface EMG Recordings,” in 2021 10th International IEEE/EMBS Conference on Neural Engineering (NER), 2021, pp. 1074–1078.

[45] M. Jaques, M. Burke, and T. Hospedales, “NewtonianVAE: Proportional Control and Goal Identification from Pixels via Physical Latent Spaces,” in 2021 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR), 2021, pp. 4452–4461.

[46] V. Ghaffari, “A robust predictive observer-based integral control law for uncertain LTI systems under external disturbance,” J. Franklin Inst., vol. 359, no. 13, pp. 6915–6938, Sep. 2022.

[47] A. Russo, G. P. Incremona, and A. Cavallo, “Higher-Order Sliding Mode design with Bounded Integral Control generation,” Automatica, vol. 143, p. 110430, Sep. 2022.

[48] B. Shi, Z. Zhao, D. Tan, and Y. Zhu, “Integral Control of Megawatt Power Electronic Systems as Generalized Hybrid Systems,” IEEE J. Emerg. Sel. Top. Power Electron., vol. 10, no. 4, pp. 4254–4274, Aug. 2022.

[49] X. Chen, X. Zhang, and Y. Chang, “Sampled-Data Integral Control of Nonholonomic Systems with Unknown Constant Disturbances,” IEEE Trans. Circuits Syst. II Express Briefs, vol. 69, no. 6, pp. 2792–2796, Jun. 2022.

[50] U. N. L. T. Alves et al., “Discrete-Time $$\mathcal {H}_{\infty }$$ Integral Control Via LMIs Applied to a Furuta Pendulum,” J. Control. Autom. Electr. Syst., vol. 33, no. 3, pp. 1–12, Jun. 2022.

[51] G. Guo and J. Kang, “Distributed Optimization of Multiagent Systems Against Unmatched Disturbances: A Hierarchical Integral Control Framework,” IEEE Trans. Syst. Man, Cybern. Syst., vol. 52, no. 6, pp. 3556–3567, Jun. 2022.

[52] V. Ghaffari and S. Mobayen, “Robust <math altimg=“si5.svg” display=“inline” id=“d1e405”> <msub> <mrow> <mi>H</mi> </mrow> <mrow> <mi mathvariant=“normal”>∞</mi> </mrow> </msub> </math> integral controller design for regulation problem of uncertain nonlinear systems with non-zero set-,” Commun. Nonlinear Sci. Numer. Simul., vol. 107, p. 106158, Apr. 2022.

[53] M. E. Gilmore, C. Guiver, and H. Logemann, “Sampled-data integral control of multivariable linear infinite-dimensional systems with input nonlinearities,” Math. Control Relat. Fields, vol. 12, no. 1, p. 17, 2022.

[54] Z. Xu, T. Liu, and Z.-P. Jiang, “Nonlinear integral control with event-triggered feedback: Unknown decay rates, zeno-freeness, and asymptotic convergence,” Automatica, vol. 137, p. 110028, Mar. 2022.

[55] N. Agrawal, S. Samanta, and S. Ghosh, “Optimal State Feedback-Integral Control of Fuel-Cell Integrated Boost Converter,” IEEE Trans. Circuits Syst. II Express Briefs, vol. 69, no. 3, pp. 1382–1386, Mar. 2022.

[56] H. Ji, F. Xie, L. Shen, R. Yang, and B. Zhang, “Unstable behavior analysis and stabilization of double‐loop proportional‐integral control H‐bridge inverter with inductive impedance load,” Int. J. Circuit Theory Appl., vol. 50, no. 3, pp. 904–925, Mar. 2022.

[57] H. Gu, K. Liu, G. Zhu, and J. Lü, “Leader‐following consensus of stochastic dynamical multi‐agent systems with fixed and switching topologies under proportional‐integral protocols,” Asian J. Control, Jul. 2022.

[58] J. Park, H. Kim, K. Hwang, and S. Lim, “Deep Reinforcement Learning Based Dynamic Proportional-Integral (PI) Gain Auto-Tuning Method for a Robot Driver System,” IEEE Access, vol. 10, pp. 31043–31057, 2022.

[59] S. K. Pradhan, D. Acharya, and D. K. Das, “Internal model control based proportional-integral controller with class topper optimization for power control of molten salt breeder reactor core,” Ann. Nucl. Energy, vol. 165, p. 108675, Jan. 2022.

[60] F. Sun and Y. Shen, “Consensus in multi-agent systems with multiple disturbances and time delay via proportional-integral control,” in 2021 40th Chinese Control Conference (CCC), 2021, pp. 4960–4965.

[61] H. Esmaeili and M. Asadi, “A Sliding Mode Controller Based on Robust Model Reference Adaptive Proportional-integral Control for Stand-alone Three-phase Inverter,” J. Mod. Power Syst. Clean Energy, vol. 9, no. 3, pp. 668–678, 2021.

[62] X. Ge, Y. Han, X. Yang, B. Liu, and B. Liu, “Optimal Design, Proportional-Integral, and Model Predictive Control of Intensified Process for Formic Acid Production II: Reactive Dividing Wall Column without Uncontrollable Vapor Split,” Ind. Eng. Chem. Res., vol. 60, no. 4, pp. 1784–1798, Feb. 2021.

[63] C. Gonzalez-Castano, F. Flores-Bahamonde, H. Young, R. Heydari, S. Sabzevari, and J. Rodriguez, “Model-Free Predictive Control based on ARX Representation: A Comparative Assessment with Proportional-Integral Regulator,” in 2021 IEEE International Conference on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), 2021, pp. 953–958.

[64] E. Krushel, A. Panfilov, and O. Stepanchenko, “Distributed Proportional-Integral Control Law Capabilities for the Temperature Maintaining System within the Vertical Greenhouse,” in 2021 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM), 2021, pp. 591–595.

[65] L. Yao, Y. Wei, and S. Fu, “Distributed smooth optimisation with event-triggered proportional-integral algorithms,” Int. J. Control, vol. 95, no. 12, pp. 3262–3273, Dec. 2022.

[66] Z. Gao, Y. Chen, W. Li, and Y. Song, “Robust adaptive fault‐tolerant proportional‐derivative tracking control for six‐degrees of freedom unmanned aerial vehicles,” Int. J. Robust Nonlinear Control, vol. 32, no. 18, pp. 9761–9775, Dec. 2022.

[67] C. W. Wong, X. Cheng, D. Fan, W. Li, and Y. Zhou, “Friction drag reduction based on a proportional-derivative control scheme,” Phys. Fluids, vol. 33, no. 7, p. 075115, Jul. 2021.

[68] R. SAKAMOTO, T. SHOBUDANI, R. HOTCHI, and R. KUBO, “QoE-Aware Stable Adaptive Video Streaming Using Proportional-Derivative Controller for MPEG-DASH,” IEICE Trans. Commun., vol. E104.B, no. 3, pp. 286–294, Mar. 2021.

[69] S. Karan and C. Dey, “Modified Smith predictor‐based all‐proportional‐derivative control for second‐order delay‐dominated integrating processes,” Asia-Pacific J. Chem. Eng., vol. 16, no. 2, Mar. 2021.

[70] W. Qian, L. Liu, S. Liu, H. Ma, and Z. Jin, “High-Bandwidth Frequency Servo Loop for Resonant Micro Optic Gyroscope with a Reduced Sampling Rate Proportional-Derivative Controller,” in 2021 19th International Conference on Optical Communications and Networks (ICOCN), 2021, pp. 1–3.

[71] X. CAI and H. LIU, “A six-degree-of-freedom proportional-derivative control strategy for bumblebee flight stabilization,” J. Biomech. Sci. Eng., vol. 16, no. 4, pp. 21–00113, 2021.

[72] B. A. Prasetyo, B.-L. Jian, and H.-T. Yau, “Inverted Pendulum System with Taguchi Proportional-Derivative Control Design as Optimized Parameters Implementing on Embedded System,” in 2020 International Symposium on Computer, Consumer and Control (IS3C), 2020, pp. 477–479.

[73] C. Zheng, Y. Su, and P. Mercorelli, “Single Robust Proportional-Derivative Control for Friction Compensation in Fast and Precise Motion Systems With Actuator Constraint,” J. Dyn. Syst. Meas. Control, vol. 142, no. 11, Nov. 2020.

[74] W. Lin, J. Páez Chávez, Y. Liu, Y. Yang, and Y. Kuang, “Stick-slip suppression and speed tuning for a drill-string system via proportional-derivative control,” Appl. Math. Model., vol. 82, pp. 487–502, Jun. 2020.

[75] S. Fiori and L. Del Rossi, “Minimal control effort and time Lie-group synchronisation design based on proportional-derivative control,” Int. J. Control, vol. 95, no. 1, pp. 138–150, Jan. 2022.

[76] A. Kherkhar, Y. Chiba, A. Tlemçani, and H. Mamur, “Thermal investigation of a thermoelectric cooler based on Arduino and PID control approach,” Case Stud. Therm. Eng., vol. 36, p. 102249, Aug. 2022.

[77] A. Y. Aleksandrov and A. A. Tikhonov, “Application of a PID-like control to the problem of triaxial electrodynamic attitude stabilization of a satellite in the orbital frame,” Aerosp. Sci. Technol., vol. 127, p. 107720, Aug. 2022.

[78] H. Kamran et al., “Simulation and modeling of copper-chlorine cycle, molten carbonate fuel cell alongside a heat recovery system named regenerative steam cycle and electric heater with the incorporation of PID controller in MATLAB/SIMULINK,” Int. J. Hydrogen Energy, vol. 47, no. 95, pp. 40462–40475, Dec. 2022.

[79] M. P. E. Rajamani, R. Rajesh, and M. W. Iruthayarajan, “A PID control scheme with enhanced non-dominated sorting genetic algorithm applied to a non-inverting buck-boost converter,” Sādhanā, vol. 47, no. 4, p. 222, Nov. 2022.

[80] Y. Aoudni et al., “Metaheuristics based tuning of robust PID controllers for controlling voltage and current on photonics and optics,” Opt. Quantum Electron., vol. 54, no. 12, p. 809, Dec. 2022.

[81] E. Özer, A. Sayın, and F. Kaçar, “Voltage-mode PID controller design employing canonical number of active and passive elements,” Analog Integr. Circuits Signal Process., vol. 113, no. 3, pp. 361–371, Dec. 2022.

[82] N. Zhu, X.-T. Gao, and C.-Q. Huang, “A data-driven approach for on-line auto-tuning of minimum variance PID controller,” ISA Trans., vol. 130, pp. 325–342, Nov. 2022.

[83] T. Shuprajhaa, S. K. Sujit, and K. Srinivasan, “Reinforcement learning based adaptive PID controller design for control of linear/nonlinear unstable processes,” Appl. Soft Comput., vol. 128, p. 109450, Oct. 2022.

[84] S. M. Alghamdi, M. N. Ajour, N. H. Abu-Hamdeh, and A. Karimipour, “Using PCM for building energy management to postpone the electricity demand peak load and approving a new PID controller to activate alternative chiller,” J. Build. Eng., vol. 57, p. 104884, Oct. 2022.

[85] K. T. Mohamed, M. H. Abdel-razak, E. H. Haraz, and A. A. Ata, “Fine tuning of a PID controller with inlet derivative filter using Pareto solution for gantry crane systems,” Alexandria Eng. J., vol. 61, no. 9, pp. 6659–6673, Sep. 2022.