Implementasi Value Stream Mapping pada Perumahan Sederhana di Indonesia

Buku ini menjelaskan tentang waste pada proses pembangunan rumah di perumahan sederhana (low cost housing) menggunakan Value Stream Mapping (VSM). Lebih lanjut, buku ini dapat digunakan untuk menganalisis eksisting/peta kondisi awal (Current State Map) proses pembangunan rumah di perumahan sederhana, jenis-jenis waste yang terjadi dalam proses pembangunan rumah di perumahan sederhana, penyebab terjadinya waste dalam proses pembangunan rumah di perumahan sederhana, dan solusi dan rekomendasi terhadap waste yang dituangkan dalam peta kondisi perbaikan (Future State Map) proses pembangunan rumah di perumahan sederhana.

Order now

Order via Whatsapp

Author Biography

Dr. Nurlaelah, S.T., M.T. merupakan dosen pada Prodi Teknik Sipil dengan konsentrasi Manajemen Konstruksi di Universitas Muhammadiyah Jakarta. Penulis senang melakukan penelitian dengan mahasiswa dan bekerja sama dengan dosen lain di Universitas tempatnya bekerja. Sudah ada beberapa judul penelitian penulis yang dipublikasikan di jurnal internasional dan jurnal nasional bereputasi. Penulis berharap, ia juga bisa bekerja sama untuk melakukan penelitian dan pengabdian masyarakat dengan institusi lain, agar ilmu pengetahuan dalam bidang teknik sipil semakin berkembang, khususnya di Indonesia.

References

Anonim, ‘Undang-Undang RI No.1 Tahun 2011 tentang Perumahan dan Kawasan Permukiman’.

Anonim, Property Plus Indonesia. 2010. ‘Strategi Membangun Bisnis Developer Property’, PT Ufuk Publishing House, Jakarta.

Assaf, S.A. Al Hejji S. 2006. ‘Causes of Delay in Large Construction Projects’. International Journal of Project Management, 24 (4): 349-357.

Abdul-Rahman, Hamzah, M. Hassen Al-Tmeemy, Samiah., Harun, Zakaria., & Kho, Mei Ye. 2012. ‘The Major Causes of Quality Failures in the Malaysian Building Construction Industry’. Research & Innovation, University of Malaya, 50603 Kuala Lumpur, Malaysia.

Abd El-Razek, M., Bassioni, H., & Mobarak, A. 2008. ‘Causes of Delay in Building Construction Projects in Egypt’. Journal of Construction Engineering Management, 134, 831–841. doi:10.1061/(ASCE)0733-9364(2008)134:11(831). 

O. Ralph & R. Iyagba. 2012. ‘Factors Affecting Contractor Performance: A Comparative Study of Non Value-Adding Activities in Nigeria and Indonesia’, vol. 3, no. 5, pp. 467–474.

Arleroth, J., & Kristensson, H. 2011. ‘Waste in Lean Construction–A Case Study of a PEAB Construction Site and The Development’, Thesis in the Master of Supply Chain Management, Chalmers University of Technology.

Al-Kharashi, A., & Skitmore, M. 2009. ‘Causes of delays in Saudi Arabian Public Sector Construction Projects’. Construction Management and Economics, 27, 3–23.10.1080/0144619080 2541457 

André Perroni de Burgos & Dayana Bastos Costa. 2010. ‘Assesment of Kanban Use on Construction Sites’. Proceedings for the 20th Annual Conference of the International Group for Lean Construction.

Brett Jackson. 2013. ‘Seven Wastes’, M.S. Workshop Leader (Kaizen Promotion Office) *Contents included in the presentation are informed by our study of the Toyota Production System *Images are from Microsoft Office and are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. 

Chan, D & Kumaraswamy, M. 2002. ‘Compressing Construction Duration: Lessons Learned From Hong Kong Building Projects’. International Journal of Project Management, Vol. 20 No. 1, pp. 23-35.

Carvalho, A.C.V., Granja, A.D., & Silva, V.G. 2017. ‘A Systematic Literature Review on Integrative Lean and Sustainability Synergies over a Building’s Lifecycle’. Sustainability, 9(7), 1156; doi:10.3390/su9071156

Chien-Liang, L. and Chen-Huu, J. 2017. ‘Exploring Interface Problems in Taiwan’s Construction Projects Using Structural Equation Modeling’. Sustainability, 9(5), 822; doi:10.3390/su9050822 

Desai, Megha, & Bhatt Rajiv. 2013. ‘A Methodology for Ranking of Causes of Delays for Residential Construction Project in Indian Context’. International Journal of Emerging Technology and Advance Engineering, Volume-3, Issue-3, pp 396-404.

Munteanu., & C. Olteanu. 2007. ‘Lean Manufacturing- A Success Key Inside of an Industrial Company’. International Conference on Economic Engineering and Manufacturing System Brasov, Recent 8, No. 3b (21b), p. 540-543.

Dinesh S., Nitin S & Pratik D. 2017. ‘Application of Value Stream Mapping (VSM) for Lean and Cycle Time Reduction in Complex Production Environments: a Case Study’. Production Planning & Control, 28:5, 398-419, DOI: 10.1080/09537287.2017.1300352

Fontanini, P. S. P., Milano, C., S, Fujimoto, A., Lintz, R. C. C, Gachet-Barbosa, L, & Jacintho, A. E. P. G. A. 2013. ‘Concrete Slab Value Stream Mapping of Brazilian Residential Buildings - A Lean Construction Study Case’. Paper presented at the 4th International Conference on Manufacturing Science and Engineering, ICMSE 2013, March 30, 2013 - March 31, 690 693. pp. 829-834.

Emuze & John Smallwood. 2014. ‘Factors Contributing to Non Value Adding Activities in South African Contractors’. Journal Engineering Design and Technology, DOI: 10.1108/JEDT-07-2011-0048.

Handley, C.C. 2000. ‘Quality Improvement Through Root Cause Analysis’. Hospital Materiel Management Quarterly, 21(4): p. 74-78. 

Heineck & L. F. M. 2009. Building Lean Collection–Building with Lean Management. Fortaleza, Publisher Graphic Expression, V.2 (in Portuguese).

K. Raju & Y. T. Krishnegowda. 2014. ‘Value Stream Mapping and Pull System for Improving Productivity and Quality in Software Development Projects’. Int. J. of Recent Trends in Engineering & Technology, Vol. 11, June.

Hari Agung Yuniarto. 2012. ‘The Shortcomings of Existing Root Cause Analysis Tools’. Proceedings of the World Congress on Engineering, Vol III WCE 2012, July 4 - 6, London, U.K.

Hicks, C., Heidrich, O., McGovern, T., & Donnelly, T. 2004. ‘A Functional Model of Supply Chains and Waste’. International Journal of Production Economics. 89 (2): 165-174.

Felipe, P. Achell, & M. B. Bonet. 2013. ‘A Preliminary Proposal for a Waste-Based Management Approach to Improve Performance in Construction’. Proceeding IGLC-21, July 2013, Fortaleza, Brazil, pp. 115–124.

Murat Gunduz & Ayman Fahmi Naser. 2017. ‘Cost Based Value Stream Mapping as a Sustainable Construction Tool for Underground Pipeline Construction Projects’, doi:10.3390/ su9122184, www.mdpi.com/journal/sustainability

Josephson, P.E & L. Saukkoriipi. 2007. ‘Waste in Construction Projects: Call for a New Approach’, Chalmers University of Technology, 9197618179.

Martin, K., & Osterling, M. 2013. Value Stream Mapping: How to Visualize Work and Align Leadership for Organizational Transformation. New York: McGraw-Hill.

N.E. Triana & M.E. Beatrix. 2019. ‘Application of Kanban Production System in Labor Intensive Company’. SINERGI, Vol. 23, No. 1, February 2019: 33-40 http://mercubuana.ac.id/index.php/sinergi http://doi.org/10.22441/sinergi.2019.1.005.

Nor Azian Abdul Rahman, Sariwati Mohd Sharif, & Mashitah Mohamed Esa. 2013. ‘Lean Manufacturing Case Study with Kanban System Implementation’. International Conference on Economics and Business Research (ICEBR 2013), Available online at www.sciencedirect.com, Procedia Economics and Finance 7, 174–180.

Okes, D. 2009. Root Cause Analysis. The Core of Problem Solving and Corrective Action. ASQ Quality Press, Milwaukee, WI.

O’Connor, R & Swain. B. 2013. Implementing Lean in Construction: Lean Tools and Techniques–An Introduction. C730, CIRIA, London (ISBN:978-0-86017-732-6) Go to: www.ciria.org/ service/lean. 

Pasqualini, F., & Zawislak, P. A. 2005. ‘Value Stream Mapping in Construction: A Case Study in a Brazilian Construction Company’, Paper presented at the 13th International Group for Lean Construction Conference, IGLC 13, July 19, 2005 - July 21, pp. 117-125.

Rother dan Shook. 2009, ‘Value Stream Mapping, http://courses.washington.edu/ie337/Value_Stream_Mapping.pdf

Rawabdeh. 2005. ‘A Model for the Assesment of Waste in Job Shop Environments’. International Journal of Operations and Production Management, Vol. 25, No. 8, Emerald Group Publishing Limited, 0144 3577.

Suparno. 2006. Planning and Housing Development. ANDI Publisher, Yogyakarta.

Sarhan, S & Fox, A. 2013. ‘Barriers to Implementing Lean Construction in the UK Construction Industry’. The Built & Human Environment Review, Volume 6.

Shima Ghavami Modegh. 2013. ‘An Evaluation of Waste in Steel Pipe Rack Installation’. Proceedings IGLC-21, Fortaleza, Brazil.

Sergio Rosenbaum; Mauricio Toledo, Ph.D. & Vicente González, Ph.D. 2014. ‘Improving Environmental and Production Performance in Construction Projects Using Value-Stream Mapping: Case Study’, https://ascelibrary.org/doi/abs/ 10.1061/(ASCE)CO.1943-7862.0000793

Shou Wenchi, Jun Wang, Xiangyu Wang & Heap-Yih Chong. 2015. ‘An Application of Value Stream Mapping for Turn Around Maintenance in Oil and gas Industry: Case Study and Lessons Learned’. Raidén, A B and Aboagye-Nimo, E (Eds) Procs 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 813-822.

Tersine, R.J. 2004. ‘The Primary Drivers for Continuous Improvement: The Reduction of The Triad of Waste’. Journal of Managerial Issues, 16(1), pp.15-29.

‘What is Pull System, Details & Benefits’, https://kanbanize.com/ lean-management/pull/what-is-pull-system/

Yaxu Lia & José L. Fernández Solís. 2015. ‘A Structured Literature Review: Value Stream Mapping (VSM in Construction Industry)’. Department of Construction Science, Texas A&M University, College Station, United States of America.

Yu, Haitao, & Al-Hussein, Mohammed. 2009. ‘Development of Lean Model for House Construction Using Value Stream Mapping’. Journal of Construction Engineering and Management.