Rahasia Ketangguhan Material: Memahami Recovery dan Transformasi Struktur

Authors

Ridhwan Haliq
Institut Teknologi Kalimantan
Alfian Djafar
Institut Teknologi Kalimantan
Eriek Wahyu Restu Widodo
Politeknik Perkapalan Negeri Surabaya
Mochammad Karim Al Amin
Politeknik Perkapalan Negeri Surabaya

Keywords:

Ketangguhan Material, Mikrostruktur Material, Recovery Material, Rekayasa Material, Transformasi Struktur

Synopsis

Rahasia Ketangguhan Material: Memahami Recovery dan Transformasi Struktur mengajak pembaca menyelami bagaimana material merespons kerusakan, tekanan, dan perubahan lingkungan. Buku ini membahas konsep recovery dan transformasi struktur secara komprehensif—mulai dari mekanisme dasar hingga implikasinya dalam rekayasa material modern. Dengan pendekatan yang sistematis dan mudah dipahami, buku ini menjembatani teori dan praktik, membantu pembaca memahami bagaimana sifat mekanik dan mikrostruktur material dapat dipulihkan, diperkuat, atau ditransformasikan untuk meningkatkan kinerja dan ketahanannya. Cocok bagi mahasiswa, peneliti, dan praktisi teknik material yang ingin memperdalam pemahaman tentang perilaku material serta penerapannya dalam industri dan teknologi masa depan. Buku ini bukan sekadar menjelaskan bagaimana material rusak, tetapi mengungkap rahasia bagaimana material dapat bangkit kembali dan bertransformasi menjadi lebih tangguh.

 

Order now

Order via Whatsapp

 

References

Akhtar, A. and Teghtsoonian, E. (1972) ‘Substitutional solution hardening of magnesium single crystals’, Philosophical Magazine, 25(4). Available at: https://doi.org/10.1080/14786437208229311.

Alexander, T.G. and Bitton, D. (2025) ‘Beck, Julie B. (1954–)’, in Historical Dictionary of the Latter-day Saints. Available at: https://doi.org/10.5040/9798881824945-1038.

Arribas, M., López, B. and Rodriguez-Ibabe, J.M. (2005) ‘Influence of Ti on Static Recrystallization in Near Net Shape Steels’, Materials Science Forum, 500–501. Available at: https://doi.org/10.4028/www.scientific.net/msf.500-501.131.

Axen, G.J. (2016) ‘3. Mechanics of Low-Angle Normal Faults’, in Rheology and Deformation of the Lithosphere at Continental Margins. Available at: https://doi.org/10.7312/karn12738-004.

Barioz Aquilon, S. (2020) ‘Les maisons forestières, de la Direction générale des forêts à l’ONF (xixe-xxie siècle). Les oubliées du paysage de la forêt domani’, Projets de paysage [Preprint], (22). Available at: https://doi.org/10.4000/paysage.8948.

Clareborough, J.K. and Simpson, F. (1972) ‘The role of the nurse in modern cardiac surgery.’, The Nursing journal of India, 63(4). Available at: https://doi.org/10.48029/nji.1972.lxiii404.

Doherty, F.G. and Cherry, D.S. (1988) ‘Tolerance of the Asiatic clam Corbicula spp. to lethal level of toxic stressors-A review’, Environmental Pollution, 51(4). Available at: https://doi.org/10.1016/0269-7491(88)90167-4.

Donn, B. and Nuth, J.A. (1985) ‘Does nucleation theory apply to the formation of refractory circumstellar grains?’, The Astrophysical Journal, 288. Available at: https://doi.org/10.1086/162779.

Drouard, A. (1983a) ‘Le développement des sciences sociales en France’, in Le développement des sciences sociales en France. Available at: https://doi.org/10.3917/cnrs.droua.1983.01.0136.

Drouard, A. (1983b) ‘Le développement des sciences sociales en France’, in Le développement des sciences sociales en France. Available at: https://doi.org/10.3917/cnrs.droua.1983.01.0013.

Fyfe, D. and Montgomery, D. (1979) ‘Possible inverse cascade behavior for drift-wave turbulence’, Physics of Fluids, 22(2). Available at: https://doi.org/10.1063/1.862565.

Gordon, P. and Vandermeer, R.A. (1962) ‘Mechanism of boundary migration in recrystallization’, Metallurgical Society of American Institute of Mining, Metallurgical and Petroleum Engineers -- Transactions, 224(5).

Haessner, F. and Schmidt, J. (1994) ‘Verformter zustand und rekristallisationswarme tieftemperaturtordierter hochreiner aluminiumsorten’, Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 85(5). Available at: https://doi.org/10.1515/ijmr-1994- 850508.

Hahn, T. et al. (2002) ‘Efficacy of High-Efficiency Particulate Air Filtration in Preventing Aspergillosis in Immunocompromised Patients With Hematologic Malignancies’, Infection Control & Hospital Epidemiology, 23(9). Available at: https://doi.org/10.1086/502101.

Hirsch, M.W. and Pugh, C.C. (1969) ‘Stable manifolds for hyperbolic sets’, Bulletin of the American Mathematical Society, 75(1). Available at: https://doi.org/10.1090/S0002-9904-1969- 12184-1.

Hirsch, P.B. and Otte, H.M. (1957) ‘X-ray diffraction from body-centred cubic crystals containing stacking faults’, Acta Crystallographica, 10(7). Available at: https://doi.org/10.1107/s0365110x57001516.

Humphreys, F.J. and Martin, J.W. (1968) ‘The effect of dispersed phases upon the annealing behaviour of plastically deformed copper crystals’, Philosophical Magazine, 17(146). Available at: https://doi.org/10.1080/14786436808226169.

Ji, M., Slater, C. and Davis, C. (2020) ‘Thermomechanical Processing Map in Retaining {100}//ND texture via Strain-Induced Boundary Migration Recrystallization Mechanism’, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51(12). Available at: https://doi.org/10.1007/s11661-020-06047-x.

Keating, R.C. (1972) ‘The Comparative Morphology of the Cochlospermaceae. III. The Flower and Pollen’, Annals of the Missouri Botanical Garden, 59(2). Available at: https://doi.org/10.2307/2394760.

Ko, R., Lee, D.H. and Yoo, H. (2023) ‘Annealing and Doping Effects on Transition Metal Dichalcogenides—Based Devices: A Review’, Coatings. Available at: https://doi.org/10.3390/coatings13081364.

Koller, L.R. and Fremont, H.A. (1950) ‘Negative wire corona at high temperature and pressure’, Journal of Applied Physics, 21(8). Available at: https://doi.org/10.1063/1.1699750.

Kuhlmann, M.C.M. de A. (2010) ‘A Imigração Alemã na Literatura Brasileira: uma breve análise’, Anagrama, 3(3). Available at: https://doi.org/10.11606/issn.1982- 1689.anagrama.2010.35439.

Lee, F.F.M., Shyne, J.C. and Nix, W.D. (1968) ‘Self stresses and line tensions in dislocation loops’, Materials Science and Engineering, 3(3). Available at: https://doi.org/10.1016/0025- 5416(68)90008-6.

Maier, A.M., Perryman, B.L. and Olson, R.A. (2001) ‘Climatic influences on recruitment of 3 subspecies of Artemisia tridentata’, Journal of Range Management, 54(6). Available at: https://doi.org/10.2458/azu_jrm_v54i6_maier.

Masing, G. and Raffelsieper, J. (1950) ‘Mechanische Erholung von Aluminium-Einkristallen’, International Journal of Materials Research, 41(3). Available at: https://doi.org/10.1515/ijmr- 1950-410301.

Michalak, J.T. and Glenn, R.C. (1961) ‘Transmission Electron Microscope Observations of Magnetic Domain Walls’, Journal of Applied Physics, 32(7). Available at: https://doi.org/10.1063/1.1736215.

Michalak, J.T. and Paxton, H.W. (1961) ‘Some recovery characteristics of zone-melted iron’, Metallurgical Society of American Institute of Mining, Metallurgical and Petroleum Engineers - Transactions, 221(4).

Mithen, J.P. and Sear, R.P. (2014) ‘Computer simulation of epitaxial nucleation of a crystal on a crystalline surface’, Journal of Chemical Physics, 140(8). Available at: https://doi.org/10.1063/1.4866035.

Mori, N., Jimbo, K. and Shimamune, Y. (2022) ‘Effects of annealing following back contact metal layer formation on CZTS solar cell properties’, Japanese Journal of Applied Physics, 61(SB). Available at: https://doi.org/10.35848/1347-4065/ac27b4.

Moriya, T. (1964) ‘Ferro- and antiferromagnetism of transition metals and alloys’, Solid State Communications, 2(8). Available at: https://doi.org/10.1016/0038-1098(64)90371-0.

Nicolás-López, R. and Valdiviezo-Mijangos, O.C. (2016) ‘Rock physics templates for integrated analysis of shales considering their mineralogy, organic matter and pore fluids’, Journal of Petroleum Science and Engineering, 137. Available at: https://doi.org/10.1016/j.petrol.2015.11.009.

Niu, Z. et al. (2024) ‘Nature of Oxides in Al–Mg Alloys’, Transactions of the Indian Institute of Metals, 77(10). Available at: https://doi.org/10.1007/s12666-023-03207-6.

O’Brien, M.F. and Clareborough, J.K. (1967) ‘Heterograft aortic-valve replacement.’, Lancet, 1(7496). Available at: https://doi.org/10.1016/s0140-6736(67)91491-2.

Perryman, M. (2018) ‘Occupational Therapist Perspectives on the Potential of Performance Profiling in Practice’, The American Journal of Occupational Therapy, 72(4_Supplement_1). Available at: https://doi.org/10.5014/ajot.2018.72s1-po6043.

Ramalingam, K. et al. (2025) ‘Thermo-Micro-Mechanical Modeling of Shear Cutting and Flange Forming in S700 Steel’, International Journal of Mechanical Sciences [Preprint]. Available at: https://doi.org/10.1016/j.ijmecsci.2025.110764.

Rappaz, M. et al. (2020) ‘Solidification of Metallic Alloys: Does the Structure of the Liquid Matter?’, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51(6). Available at: https://doi.org/10.1007/s11661-020-05770-9.

Rehm, J. (2018) ‘“Green revolution” crops bred to slash fertilizer use’, Nature [Preprint]. Available at: https://doi.org/10.1038/d41586-018-05980-7.

Ricklefs, R.E. (2012) ‘Speciation, extinction and diversity’, in Speciation and Patterns of Diversity. Available at: https://doi.org/10.1017/cbo9780511815683.015.

Schmidt, J. and Haeßner, F. (1990) ‘Stage III-recovery of cold worked high-purity aluminium determined with a low-temperature calorimeter’, Zeitschrift für Physik B Condensed Matter, 81(2). Available at: https://doi.org/10.1007/BF01309351.

Singh, R. (2022) Arc Welding Processes Handbook, Arc Welding Processes Handbook. Available at: https://doi.org/10.1002/9781119819080.

Speer, M., Hartigan, J. and Leslie, L.M. (2024) ‘Machine Learning Identification of Attributes and Predictors for a Flash Drought in Eastern Australia’, Climate, 12(4). Available at: https://doi.org/10.3390/cli12040049.

Tessitore, A. et al. (2014) ‘Clinical correlations of microstructural changes in progressive supranuclear palsy’, Neurobiology of Aging, 35(10). Available at: https://doi.org/10.1016/j.neurobiolaging.2014.03.028.

UK, CAB International, Sutton, B.C. and Waterston, J.M. (1966) ‘ Septoria tritici . [Descriptions of Fungi and Bacteria]. ’, Descriptions of Fungi and Bacteria [Preprint]. Available at: https://doi.org/10.1079/dfb/20056400090.

UU Republik Indonesia et al. (2022) ‘PENENTUAN ALTERNATIF LOKASI TEMPAT PEMBUANGAN AKHIR (TPA) SAMPAH DI KABUPATEN SIDOARJO’, Energies, 15(1).

Vandermeer, R.A. and Juul Jensen, D. (2001) ‘Microstructural path and temperature dependence of recrystallization in commercial aluminum’, Acta Materialia, 49(11). Available at: https://doi.org/10.1016/S1359-6454(01)00074-X.

Walker, M.M. and Bitterman, M.E. (1989) ‘Attached Magnets Impair Magnetic Field Discrimination by Honeybees’, Journal of Experimental Biology, 141(1). Available at: https://doi.org/10.1242/jeb.141.1.447.

Westenius, M. et al. (1990) ‘Light-particle emission and projectile breakup in 35A MeV 12C induced collisions’, Nuclear Physics, Section A, 509(3). Available at: https://doi.org/10.1016/0375-9474(90)90095-4.

Yu, C.H. et al. (1990) ‘High-spin spectroscopic study of 167Lu’, Nuclear Physics, Section A, 511(1). Available at: https://doi.org/10.1016/0375-9474(90)90031-G.

Zhang, W. et al. (2025) ‘Correlation Between Macular Microstructural Changes with Disease Staging and Visual Acuity in Diabetic Retinopathy’, International Journal of General Medicine, Volume 18. Available at: https://doi.org/10.2147/ijgm.s516938.

Author Biographies

Ridhwan Haliq, Institut Teknologi Kalimantan
Merupakan penulis utama, penulis merupakan dosen Teknik mesin di Institut Teknologi Kalimantan. Mulai bekerja sebagai dosen dari tahun 2017 hingga 2025 (saat ini) memiliki jabatan fungsional Lektor, penulis utama memiliki pengalaman 2 tahun bekerja di PT Adhi Karya PERSERO Tbk pada divisi EPC. Sampai engan saat ini terdapat beliau telah melakukan publikasi seperti, 6 jurnal Internasional, 1 Book Chapter Internasional SPRINGER dengan H-index 2. Jurnal nasional yang dihasilkan sebanyak 36 artikel. Fokus bidang yang ditekuni oleh penulis utama buku refrensi ini adalah material innovative dan failure analysis. Beberapa kerjasama penelitian telah dilakukan baik nasional dan internasional. Sampai saat ini penulis telah menulis lebih dari 10 Buku ber ISBN dan salah satunya memiliki ISSN dan terindeks SPRINGER singapore.
Alfian Djafar, Institut Teknologi Kalimantan
Merupakan dosen Teknik mesin di Institut Teknologi Kalimantan. Mulai bekerja sebagai dosen dari tahun 2016 hingga 2025 (saat ini) memiliki jabatan fungsional Lektor, penulis menempuh pendidikan S-1 Bachelor Degree in Mechanical Engineering, Hasanuddin University dan pendidikan S-2 Master Degree in Mechanical Engineering, Hasanuddin University. Memiliki bidang keahlian bidang konstruksi mesin serta minat penelitian Mechatronics and Robotics Design of Mechanical Components. Memeiliki pengalaman proyek lebih dari 8 dan 30 lebih publikias yang ter indeks google scholar. Penulis utama ke dua memiliki tanggung jawab pada National Center for Sustainable Transportation Technology PUI-STT.
Eriek Wahyu Restu Widodo, Politeknik Perkapalan Negeri Surabaya
Merupakan dosen Teknik Pengelasan D4 di Politeknik Perkapalan Negeri Surabaya. Penulis lahir di Trenggalek 14 Juli 1989. Menempuh S-1 di UNAIR pada jurusan Fisika bidang material dan melanjutkan S-2 di Teknik Material dan Metalurgi ITS. Lebih dari 10 proyek penelitian telah dilakukan dari tahun 2019, baik pendanaan Internal atau Eksternal. 15 publikasi telah dihasilkan baik dari nasional atau internasional. Pernah mengemban sebagai ketua kemahasiswaan program studi D4 Teknik Pengelasan selama satu periode dan memiliki hasil nilai yang memuaskan di database SINTA.
Mochammad Karim Al Amin, Politeknik Perkapalan Negeri Surabaya
Merupakan dosen Teknik Pengelasan D4 di Politeknik Perkapalan Negeri Surabaya. Penulis lahir di Sidoarjo, 17 Januari 1991. Menempuh S-1 di PPNS Teknik Pengelasan dan melanjutkan S-2 di Teknik Material dan Metalurgi ITS. Saat ini penulis ke-6 memiliki tugas sebagai Kepala Laboratorium Pengelasan dan Karakterisasi material.

Published

January 1, 2026